V2 Shock Support

Manufacturer testing, accessible replacement and transferable lifetime coverage.

V2 gas springs and door operation

V2 Series lift-assist gas springs work with the hinge geometry and sealed bearings to support smooth door movement. Shock force rating and the effort applied by a person are different measurements.

Tested up to 75,000 duty cycles

The shocks used across all C8 V2 applications are tested up to 75,000 duty cycles, as confirmed by Eikon Motorsports. This test rating is not a guaranteed service life in years. Actual service life depends on installation, operating conditions and use. Transferable lifetime shock replacement provides continuing support under our warranty terms.

Replacement without removing body panels

The upper and lower shock ends use locked ball-and-socket attachments with removable safety clips. These connections are not rolling bearings. Based on Eikon’s service experience, both V2 shocks can be changed in under three minutes without removing anything from the car. Experience affects the time required. Support the door securely and follow Eikon’s replacement instructions.

Transferable lifetime shock replacement

When covered shocks lose pressure, contact Eikon. We send replacement shocks and a return label for the old ones, paying shipping both ways worldwide. Replacement repainting and re-etching of the original information are included. The lifetime coverage transfers to the next owner.

Customers install replacement shocks themselves. If an Eikon installer is already nearby on another installation, we may offer to fit them free. Dedicated shock-replacement service trips are not included. Misuse, intentional damage and vehicle-accident damage are excluded; damage caused by incorrect independent installation is excluded while remaining kit coverage continues.

Care and break-in

The V2 Series sealed bearing system requires no routine hinge greasing. A slight adjustment may be needed after the shocks break in; recurring adjustments are not expected as normal maintenance. Keep the hardware clean and contact Eikon if door operation changes. Some customers report more than a year of use without an adjustment, but adjustment-free operation for every vehicle is not guaranteed.

If the door no longer stays supported, operation changes or a shock appears damaged, stop using the lift and contact Eikon for support. Do not open a sealed gas spring.

Learn more or request support

Read the V2 engineering specifications, explore the V2 and VDI comparison, or submit a warranty inquiry.

Shopping Cart
0